sale NOW SELLING FOR $75.00 FOR THE MOUNT of APRIL Seller's Description: You, who shoot a fine Black Powder gun, know in 10 years after you purchase your fine gun, you can find replace parts. The lock is the first to come up with problems. I am offering a fine percussion lock with all harden parts. A traditional “V” spring, harden bridal, tumbler and sear. It has an adjustment screw that moves the sear nose closer to the edge of the cocking notch for light touch on trigger pull, and has a fly on the half cock to prevent the sears from falling in to the half cock notch, good for set triggers. Notice how the back of the lock has a bridle holding the Tumbler on 2 bearing surfaces and holding the rest of the parts firm and keep your hammer following the same path every shot. CVA engineered this Lock in 1980ies; Over 35 years of use and no one has call on me for repair items but a "V" spring and hammer. This lock will fit all CVA rifles; can be fitted to most ML with similar lock by some one who knows how. I have a small quantity of these locks. There are many locks for all sorts of money, but you will not fine one made this well, any were for less than I am asking. This lock has 2-side plate hole that take a 4-MM-.07 thread USA 9-52033, The Machine screws are 1" 3/4 long. The lock is 4" 7/8 long and 7/8" wide at it widest place and about 1/2 deep. These locks are made to last a long time. only the Percussion Lock is for sale. As you can see I am sell parts from one new CVA lock totaling $150,you can purchase one new lock as a back up so you grand kids can keep shooting.
|Payment and Shipping Instructions:|