|
|
|
(Public)
|
|
Q:
Hello,
What are the chokes of the barrels?
Thanks.
Mark
|
07/06/2012 |
|
A:
i dont have a choke wrench for this gauge but i will have it checked and posted soon thanks
|
07/07/2012
|
| |
|
(Public)
|
|
Q:
Does gun have choke tubes ?
|
07/06/2012 |
|
A:
no tubes fixed choke will post actual chokes soon thanks
|
07/07/2012
|
| |
|
(Public)
|
|
Q:
how is it choked?
Thanks, Mark
|
07/06/2012 |
|
A:
will post soon i dont have a choke wrench for this gauge thanks
|
07/07/2012
|
| |
|
(Public)
|
|
Q:
Sir,what chokes are the bbls?, Thanks Ed-
|
07/06/2012 |
|
A:
ed will post soon i dont have a choke wrench for this gauge but i am going to get it measured thanks
|
07/07/2012
|
| |
|
(Public)
|
|
Q:
8 July 12
Sir,
If you want to know the chocks in the 101 28ga you have for sale, you won't need a wrench or a choke gauge. It is stamped on the barrels.
Remove the fore end and look on the left side of the barrels where they meed the receiver. It is stamped into the barrels. The marks should be visible near the ejector. You might have to remove the barrel and slide the ejector forward but I doubt it.
With 28" barrels the gun is most likely choked Full/Modified or Skeet/Skeet.
Hope this helps. Good luck with you auction.
Bill
|
07/08/2012 |
|
A:
BILL Thanks alot its choked F/M
|
07/08/2012
|
| |
|
(Public)
|
|
Q:
Thanks much mark for your trouble. Ed-
|
07/08/2012 |
|
A:
thanks ed
|
07/08/2012
|
| |
|
(Public)
|
|
Q:
Sir, do you give a 3 day, no firing, review of your gun? thanks! SW
|
07/10/2012 |
|
A:
Yes we do thanks
|
07/10/2012
|
| |
|
(Public)
|
|
Q:
sir has someone attempted to refinish the stock and has the butt plate been replaced or modifiled? thanks tom
|
07/11/2012 |
|
A:
No its orignal thanks
|
07/11/2012
|
| |
|
|
